Non-destructive testing
-
Combined flaw detector car AVICON-03M with enhanced functionality Complex reliable inspection up to 250 km of the rail track during one inspection with speed of up to 60 kmh based on 4 non-destructive inspection systems.
-
Mobile diagnostic complex Complex reliable inspection up to 250 km of the rail track during one inspection with speed of up to 60 kmh based on 6 non-destructive inspection systems.
-
Self-propelled trolley for ultrasonic rail inspection AVICON-16 Ultrasonic inspection on speed of up to 10 kph with complete registration of signals
-
Modern dual-line flaw detector AVICON-14 Effective inspection of rails with unsatisfactory surfaces in mode “Defectograms decryption” on speed of up to 5 kmh.
-
Double-line flaw detector AVICON-11 Reliable and time-proved dual-line flaw detector with display inspection defectogram on the screen
-
Flaw detector fitted on a stick with signal registration AVICON-15
Designed for inspection:
-
local rail lines (up to 200 m);
-
confirmed testing according to removable and portable devices;
-
track switches;
-
station track lines;
-
bridges and tunnels;
-
rails from minimum reserve stock.
-
-
Single-line ultrasonic flaw detector AVICON-12 Ideally suitable for rail tracks of the industrial plants, track switches, station lines, bridges, tunnels, approach lines, crane tracks, for confirmed testing
-
Single-line flaw detector USK-004R with micro crack detection Flaw detector with detection and evaluation micro cracks in the railhead (defects type “Head checking”)
-
Flaw-detector AVICON-17 for detect critical defects in railheadsDesigned for:
-
manual confirmed testing of the separate sections and welded joints by manual probe;
-
detecting internal defects in the railhead under surface damages using special scanner;
-
building-up of 3D defected railhead image;
-
monitoring of defected rails.
-
-
Portable flaw detector AVICON-02RSimple and user-friendly flaw detector for manual inspection in field and plant conditions:
-
separate rail sections;
-
welded rail joints;
- responsible metal products.
-
-
Multichannel flaw detector MIG-UKSM for ultrasonic inspection of welded joints
Effective inspection of the flash welded joints with high capacity and inspection report
-
Installation of automated inspection of the welded rail joints AVTOCON-S
Designed for automated acceptance inspection of welded rail joints on railway plants
One-of-a-kind
-
Equipment for welding plant MIG-UKSM/RSP Automatic inspection of the welded joints on railway plants
-
Flaw detector complex based on flaw detector AVICON-02R/PCComplex is designed for ultrasonic inspection in plant conditions:
-
Flash welded rail joints;
-
Separate rail sections;
-
Other metal goods.
-
-
Installation for input inspection of rails AVICON-11RSP/VS Designed for input inspection of the used rails along all section (including rail foot blades)
-
Ultrasonic probes for testing of the metal constructions
Radioavionica JSC supplies removable and manual piezoelectric probes AVICON type detectors.
-
Training complex AVICON-11T For learning and practicing of skills at removable flaw detectors according to technologies of the inspection rails and decrypting defectograms